In this Avobath cold process soap DIY I am sharing a perfect for spring and summer cold process soap DIY. I am using the Avobath comparable fragrance oil which packs a great punch of fruity and citrus aromas. This summery soap is relatively simple as I used three layers of lovely colors that go well with the scent. To add a bit of intricacy to the design I added a few strings of soap dough that I had left over from a previous project. I hope you get to try to make this soap, if you are a beginner in soap making, this is a great project to start with.
This post contains affiliate links which means if you click on the link and purchase the item, I will receive an affiliate commission at no cost to you. As an Amazon Associate I earn a commission on qualifying purchases at no additional cost to you. See full disclosure here.
For this spring and summer cold process soap DIY I am using the Avobath fragrance oils. It is a very strong scent and packs a lot of punch, I it is vibrant and energetic. I used the Summer Crush Mica, Rapunzel Mica, and the Synergy Mica all from Nurture Soap. This is one of my favorite places to purchase good quality mica for the soaps that I sell.
In this cold process soap DIY I used a layered technique but with the added twist of some strings of soap dough to provide an additional interest and break the lines a bit.
My favorite cold process soap additives
Two of my favorite cold process soap making additives are kaolin clay and colloidal oatmeal. I add them to almost all of my soaps because of the wonderful properties they add to the soaps.
Kaolin clay is a very gentle clay used in many cosmetics and face masks. It is not only gentle on the skin but it is also great for anchoring the scents in the soaps. I also think it gives a great slip to the soaps that make the soap super luxurious.
Colloidal oatmeal is also used in several skin care products and is considered a skin protectant. It helps retain moisture on the skin. It is very soothing and is usually recommended for people with dry skin. You can skip it but I like it in my soaps because of its excellent skin properties.
Another additive that I tend to add to the soaps is tussah silk. I love how it makes the soap so much smoother and with a lovely silky glide.
For this Avobath cold process soap, I used three layers, each one in a different color with varying widths. This soap design technique is easy and great for beginners. I use this layered soap design often, especially when I’m experimenting with new scents and uncertain about how they’ll interact with my specific soap formulations. Generally, I have a sense of the fragrance’s behavior based on the supplier’s notes. I also take notes on every soap to document whether the soap accelerated, decelerated, or anything that I would want to know the next time I use the same fragrance oil. I encourage you to take notes as well, it is a great reference for future soap making.
How to make Spring and Summer cold process soap – Citrus Fruity Punch Avobath Cold Process Soap
Additional equipment needed for cold process soap making at home
- Mixing pitchers
- Immersion blender
- Silicone spatulas
- Funnel pitchers
- Infrared thermometer
- Digital scale
Recipes and techniques for making cold process soap at home
Check out the posts linked below for several free cold process soap recipes and techniques. I hope you find one that is perfect for you.
Hanger Swirl Almond Marzipan Cold Process Soap DIY
Clamshell Technique Cold Process Soap DIY
Handmade Cold Process Soap Making
All Natural Aloe Vera Cold Process Soap
In this Kiss Pour and Handmade Mold DIY I not only give you a recipe and another fun technique to use, I also share how to make a mold using a cardboard milk box.
Summer Vibes Double In the Pot Swirl Cold Process Soap DIY
Coconut Milk & Coconut Water Cold Process Soap
Mahogany & Amber Cold Process Soap
Hibiscus Guava Fresca Cold Process Soap Layers – Tiger Stripe Technique
Ready to start making your own cold process soaps? Then this eBook with 25 different cold process soap formulations is the perfect resource. With so many formulations, you will have lots of inspiration to experiment and find the perfect one.
This eBook also includes best practices to modify the formulations to your liking.
Step by Step Layered Avobath Cold Process Soap DIY
- Weigh out the butters and coconut oil and melt them in the microwave
- Add the liquid oils to the melted butters
- Weigh out the water in a separate container
- Weigh out the sodium hydroxide (lye) needed for the soap in a separate container
- Sprinkle the sodium hydroxide (lye) into the water and mix well, then allow to cool to 85-90 degrees F
- Add the lye water solution to the melted oils and butters
- Mix using the immersion blender for only a few seconds until you achieve a light trace
- Split the batter into three separate containers and mix the Summer Crush (peach) mica colorant into one of the soap containers the Rapunzel (gold yellow) mica into a second container and the Synergy (teal green) mica in the smallest container.
- Pour the Summer Crush soap batter on a larger layer into the mold
- Pour the Synergy color soap batter into the mold, use a spatula to break the fall and avoid pouring into the first layer
- I added soap dough strings I had available, you can make your own or skip this step. See the Soap Dough post to learn more!
- Pour the third layer of soap using the Rapunzel color soap dough. As with the earlier step, use the spatula to break the fall so that the soap stays on top of the second layer and does not mix in.
- Decorate the top of the soap using the remaining soap batter – I added gold bursting beads from Brambleberry
- Allow the soap to go through the saponification process for at least 24 hours
- Cut the soap and allow it to cure for four to six weeks
I hope you enjoy making this holiday cold process soap.
You can learn more about cold process soap making in Cold process soap making most common questions answered in one place. This post summarizes all the questions I get about cold process soap making.
Cold process soap DIYs and Design Ideas:
Saffron and Oud Hanger Swirl Cold Process Soap DIY
Cashmere Fig Cold Process soap with In The Pot Swirl
Marbled Technique Cold Process Soap DIY
All Natural Facial Cold Process Soap with Activated Charcoal and Rose Clay
How to make soap dough embeds for cold process soap
Refreshing Avobath Perfect for Spring and Summer Cold Process Soap DIY
Cold Process Soapmaking with 25 unique formulations
Have you ever wanted to take control of the ingredients that go on your skin and make it a hobby or a business opportunity at the same time? This is exactly what I wanted several years ago when I was trying to figure out how to stop dry skin and start making my own natural products. I spent several months doing research and trying to understand the process and went over so many websites. I wished there was one single place to get all the information I needed to feel comfortable.
This is why I decided to create this ebook with lots of great information and 25 different formulations that can help you get started and put you on the right path for cold process soap making.
One of the main reasons you will fall in love with soapmaking is that you have full control of the ingredients you use to make your perfect batch of cold process soap for your needs. Cold process soap making is also a wonderful hobby that allows you to create a beautiful practical piece of art as well.
With 25 different formulations, best practices to tweak and some ideas on how you can test your batches, this ebook is the perfect resource to get you started.
Now on sale!
Leave a Reply